PNDS / Marking codes / TY

Identify an unknown SMD part: marking code “TY”

Packages rarely print the full part number. The marking below is shared by several part numbers — use the package, pin count and the manufacturer family together to narrow it down, then confirm against the datasheet.

17 candidates 8 with manufacturer source-traceable

Candidate part numbers

Part number	Manufacturer	Package	Mapping source
1SS241	TOS ^*	SOD-123	Public marking directory
1SS314	TOS	SOD-323	Public marking directory
1SS371	TOS ^*	SOD-323	Public marking directory
1SS381	TOS	SOD-523	Public marking directory
2SC3912	PANASONIC ^*	SOT-23	Public marking directory
2SK882	TOS	SOT-323	Public marking directory
2SK882-Y	TOS ^*	SOT-323 16fk - 3a Tos	Public marking directory
BD45421G	ROHM ^*	SSOP-5	Public marking directory
2SK2315	—	SOT-89	Public marking directory
2SK302-Y	—	SOT-23 16fk - 3a Tos	Public marking directory
BAS70TCPT	—	SOT-416 16dg - 3a Chm	Public marking directory
Emitter1	—	—	Public marking directory
P4SMAJ11C	—	DO-214AC	Public marking directory
P6SMB110C	—	DO-214AA	Public marking directory
XC6127C52HNR	—	SSOT-24	Public marking directory
XC6215B292NR	—	SSOT-24	Public marking directory
XC6223D38BNR-G	—	SSOT-24	Public marking directory

How we narrow this down

Package first — SOT-23 vs SOD-123 vs SC-59 eliminates most candidates immediately.
Pin count and body size — a 3-pin SOT-23 LDO cannot be a 6-pin dual transistor.
Marking style — laser-marked parts are usually newer production; ink marking often indicates older or second-source vendors.
Circuits around it — a part sitting on a rail with an inductor is a regulator, not a diode.
Datasheet check — every credible candidate lists its marking scheme in the “marking information” section.

FAQ

Same code, several parts — which one do I actually have? Compare package + pin count + surrounding circuit; if it still fits two parts, request a sample verification before production.
Can I substitute between the candidates? No — the same marking may sit on electrically different parts. Always match the electrical spec sheet, not just the marking.
Where do these mappings come from? Public SMD marking directories and historical stock tables; each row keeps its source so you can trace it.

Other codes starting with “T”

T2 T3 T4 T5 TOK TT T8 TK TS T6

Still not sure what the part is?

Send the code, package and a photo through the BOM hub — our engineers cross-check it against datasheets and sourcing records.

How these mappings are compiled: public SMD marking directories plus our own stock records. Each row keeps its original reference internally, so any mapping can be traced on request. ^* Manufacturer derived from the part-number family (some directory entries carry no manufacturer) — treat it as a lead, not a datasheet fact. Markings are indicative only — confirm with the physical batch marking and the original datasheet before ordering.